How to fix error 5100 canon mp287 ?

5 years ago Posted By : User Ref No: WURUR26720 0
  • Image
  • TypeBusiness
  • Image
  • Location Arapahoe, Colorado, United States
  • Price
  • Date 08-11-2018 - 30-12-2018
How to fix error 5100 canon mp287 ?, Arapahoe, Colorado, United States
Business Title
How to fix error 5100 canon mp287 ?
Event Type
Business
Business Date
08-11-2018 to 30-12-2018
Last Date for Applying
29-11-2018
Location
Arapahoe, Colorado, United States
Organization Name / Organize By
munnu halwai
Presented By
chunnu halwai
Sponsored By
vijay
Organizing/Related Departments
canon
Organization Type
Organization/Company
BusinessCategory
Both (Technical & Non Technical)
BusinessLevel
All (State/Province/Region, National & International)
Related Industries

Computer/Technology

Location
Arapahoe, Colorado, United States

How Error 5100 Canon Mp287 accur ?
A lot of various reasons cause error 5100 to seem. a number of them ar mentioned below-

  • Lodged material within the printer.
  • Incorrect installation of the ink tank(s).
  • A foreign object like paper crowded within the printer.
  • Encoder Film within the printer could also be smirched.

My Canon printer shows error 5100. What ought to I do to repair it?

Simple steps to resolve Canon printer error code 5100 :

Step 1- ensure the Encoder Film isn’t smirched.

  • Turn off the printer and undo it from the facility supply.
  • Carefully open the Paper Output cowl.
  • Check if the Encoder Film within the printer is evident.
  • If the Encoder Film is smirched, follow the steps given below to scrub it-Canon printer error code 5100
  • Get cotton swabs and alcohol.Dip a cotton swab in alcohol. ensure you press out the additional alcohol from the swab.Gently wipe the Encoder Film with the wet cotton swab. use caution to not let any alcohol drops within the printer.
  • Carefully clean the film till it becomes fully clear.

In case any wet is left on the film, wipe it with a dry cotton swab, and ensure the film dries fully.

  • Now, shut the Paper Output cowl, and plug the printer into the facility supply.
  • Turn the printer on.
  • Print a pattern to substantiate that the printing has resumed normally; if not, check and clean the Encoder Film once more.

Step 2- Check if the protecting Material or Tape remains hooked up.

  • The printer cannot perform properly if the protecting material or tape remains in it.
  • Open the paper output cowl.
  • Check the fine supply chamber to form certain the protecting material or tape isn’t hooked up thereto.
  • If it is, rigorously take away it so shut the paper output cowl.

Step 3- Check if a paper is crowded within the Paper Output Slot

  • Gently pull the paper out-
  • Carefully hold the paper and pull it out while not tearing it.
  • Do not pull the paper out from the front receptacle as doing therefore forcibly will harm the machine.
  • If you can not pull the paper out-
  • Turn the printer off so on again; this might eject the paper mechanically.
  • If not, attempt to pull the paper out from the transport unit.
  • If you fail to get rid of the paper from the paper output slot, open the paper output cowl to tug it out.

Step 4-Reset or restart your printer.

  • Make sure you undo the printer from the facility supply.
  • Let the printer be during this pause mode for one or two of seconds.
  • Now, reconnect the facility supply to the printer and switch it on.
  • Next, press the “Power” button and hold it for a number of seconds.
  • Press the “Stop” button doubly currently.
  • Repeat this procedure another time.
  • Release the “Power” button gently after you repeat the method.
  • Lastly, press the “Stop” button fourfold.


If none of the higher than steps helps to unravel your drawback, Contact the Canon Tech Support . @ 1-844-813-3268

 

Registration Fees
Free
Registration Ways
Website
Address/Venue
  2nd floor 201  Pin/Zip Code : 80001
Landmark
Colorado
Official Email ID
Contact